SHOP
Showing 1–16 of 29 results
-
“L” Economy Mast Mount
$29.99Add to cart
“L” Economy Mast Mount
$29.99“L” Economy stainless steel mast mount for GPS times antennas.
This mount is used in conjunction with the timing reference antennas depending on where you’re mounting the actual antenna. Mount will fit masts up to 2″ OD.In stock (can be backordered)
Quick View -
12V AC International Power Supply
$9.95Add to cart12V AC International Power Supply
$9.95Quick View -
2 Way GPS Splitter
$69.95Add to cart
2 Way GPS Splitter
$69.95The TimeMachines GPS 2 Way Splitter allows using one antenna with two GPS Time Servers such as the TM1000A or TM2000A. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The second port is DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.
In stock (can be backordered)
Quick View -
2 Way GPS Splitter with Power Injector
$89.95Add to cart
2 Way GPS Splitter with Power Injector
$89.95The TimeMachines GPS 2 Way Powered Splitter allows using one antenna with two GPS Time Servers such as the TM1000A or TM2000A. The splitter function is passive with both ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.
Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.
In stock (can be backordered)
Quick View -
2.5″ PoE Clock Rack Ear Set
$19.95Add to cart
2.5″ PoE Clock Rack Ear Set
$19.95These black mounting brackets will allow you to install the 2.5″ single-sided POE or Wifi clocks into a standard 19″ equipment rack. These mounts are not designed for, nor intended to be used with, the 4″ clocks or the dot matrix displays. These mounting brackets are made of powder-coated steel, and are designed and manufactured in the USA.
In stock (can be backordered)
Quick View -
5V AC International Power Supply
$9.95Add to cart5V AC International Power Supply
$9.95Quick View -
Clock Relay Connector
$4.99Add to cart
Clock Relay Connector
$4.99In stock (can be backordered)
Quick View -
COAX-SEAL #104
$8.99Add to cart
COAX-SEAL #104
$8.99– Seals Coax fittings from moisture and corrosion.
– Stays flexible at any temperature.
– Fast and easy seal for all antenna connections.
– Forms and seals over odd shapesIn stock (can be backordered)
Quick View -
Collar Mount for GPS Timing Antennas
$29.99Add to cart
Collar Mount for GPS Timing Antennas
$29.99This mount is used in conjunction with the timing reference antennas depending on were you are mounting the actual antenna.
In stock (can be backordered)
Quick View -
DotMatrtix Relay Connector
$4.99Add to cart
DotMatrtix Relay Connector
$4.99In stock (can be backordered)
Quick View -
Double Rack Mount for Time Servers
$69.99Add to cart
Double Rack Mount for Time Servers
$69.99The TimeMachines Double Rack Mount is a great way to complete a professional 19″ rack installation of the time servers. The mounts are sized to fit both the TM1000A and the TM2000A servers that we offer, and can be used to provide network time redundancy for your installation. The metal blank is 1U tall (1.75 inches) and machined so that the existing faceplate of the time server sits flush with the front of the blank. Basic assembly requires 4 screws to attach the mount to your equipment rack, and 8 screws (four for each time server) to attach the servers to the rack mount. The mounts, made of powder-coated steel, are designed and manufactured in the USA.
In stock (can be backordered)
Quick View -
GPS NTP Network Time Server (TM1000A)
$299.99Add to cart
GPS NTP Network Time Server (TM1000A)
$299.99The TimeMachines GPS NTP Network Time Server is a simple to use GPS based time server that supplies accurate time for all computers and time keeping devices on the network. By placing a time server on the local network, (S)NTP time packets are provided without requiring systems to go to the Internet to get a Stratum 1 time synchronization. The TM1000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites. With this device installed on your local network, there is no longer the worry that if the Internet connection goes down, time synchronization is lost across the network. The unit is compact and can be placed anywhere within the network layout, even using our new time server rack mounts. The built in high sensitivity GPS receiver is able to lock multiple satellites from within multiple buildings or from a window location, eliminating the requirement that an outdoor antenna be installed. Setup and use of this time server is straightforward. Simply connect both the included power supply and the GPS antenna to the base unit and then connect the base unit to the local network. Go to a computer on the network and browse to the device at its default web address to enter the software setup within the control box. Set parameters to match your network and the system will start to send out time packets to any device on the system that asks for an update from it. When paired with our digital Power Over Ethernet (PoE) clocks, synchronized time is assured no matter the state of your network, or the state of the internet time server the clocks are pointed to. Accuracy is improved because the network delay of the internet is highly variable, while the local LAN connection is likely a sub-millisecond delay. TimeMachine GPS NTP time servers are suited to any application where coordination of events at multiple locations is required. Used by education, industrial facilities, military installations, public safety command rooms, government, broadcasting, and hospitals. Supports IPv4 and IPv6.
Included with EACH TM1000A purchase:
1 Power Supply, 1 Antenna, 1 Quick Set-up Guide
Extended Warranty Pricing/Details
* Extended warranty is NOT available for International Orders *In stock (can be backordered)
Quick View -
GPS NTP+PTP Network Time Server (TM2000A)
$499.99Add to cart
GPS NTP+PTP Network Time Server (TM2000A)
$499.99* This version is NOT compatible with the Verizon eFemto products. See www.css-design.com for more information.
The TimeMachines GPS NTP+PTP Network Time Server represents a major step forward in capabilities at a breakthrough price point. It will supply accurate time for all computers and time keeping devices on the network. Supporting both Precision Time Protocol (PTP) and Network Time Protocol (NTP), a Stratum 1 time source can now be available on the local network with no need for an internet connection. The TM2000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites planet wide. In addition, a high stability OCXO reference clock is included that allows the unit to serve time if GPS lock is lost for periods of time. The unit is small and can be placed anywhere within the network layout. The built in high sensitivity GPS receiver is able to lock multiple satellites from within many buildings or from a window location, removing the requirement that outdoor antennas be installed in many applications. Outdoor antennas are available from TimeMachines including custom length cables and accessories.
To learn more about our GPS NTP and PTP time servers, give us a call today.
Included with EACH TM2000A purchase:
1 Power Supply, 1 Antenna, 1 Quick Set-up Guide
Extended Warranty Pricing/Details
* Extended warranty is NOT available for International Orders *In stock (can be backordered)
Quick View -
GPS Patch Antenna
$24.95Add to cart
GPS Patch Antenna
$24.95A GPS Patch Antenna enabling the highest quality signal for your time server.
In stock (can be backordered)
Quick View -
Lightning Arrestor 0-6 GHz
$29.99Add to cart
Lightning Arrestor 0-6 GHz
$29.990-6 GHz Lightning Protector with N Jack to N Bulkhead Jack Connectors. Includes L Shaped Mounting Bracket.
In stock (can be backordered)
Quick View -
NTP PoE and WiFi Displays
$189.99 – $459.99Select options
NTP PoE and WiFi Displays
$189.99 – $459.99Quick View
