Due to inclement weather, TimeMachines will be closed Monday the 25th, we hope to resume normal operations on Tuesday. We apologize for any inconvenience this may cause.
SMA Male to SMA Male Extension Cable, RG316
$14.95
SMA Male to SMA Male 3ft extension cable. Recommended for connecting a TimeMachines GPS splitter to time servers.
In stock (can be backordered)
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 5 × 4 × 3 in |
Only logged in customers who have purchased this product may leave a review.
Related products
-
RG-58 Cable, Type N (male) / Type N (male)
$38.95 – $134.99Select optionsRG-58 Cable, Type N (male) / Type N (male)
$38.95 – $134.99Use this cable to connect the GPS timing antenna/amplifier to the lightning arrestor in a complete outdoor antenna installation for any of our GPS network time servers.
– Gold-plated SMA connectors.
– Shielded RG-58 cable.
– Connects lightning arrestor to the GPS antenna/amplifier.
– Indoor & outdoor use.
– Approximate loss of 13 dB per 100 ft.Quick View -
4 Way GPS Splitter
$79.95Add to cart4 Way GPS Splitter
$79.95The TimeMachines GPS 4 Way Splitter allows using one antenna with four GPS Time Servers such as the TM1000A or TM2000A. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The other three ports are DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.
In stock (can be backordered)
Quick View -
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99Add to cartRack Mountable 0.5 inch WiFi NTP Clock
$209.99The TM160W WiFi clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply. The rack mount plate and relay connector is sold separately.
In stock (can be backordered)
Quick View -
Double Rack Mount for Time Servers
$69.99Add to cartDouble Rack Mount for Time Servers
$69.99The TimeMachines double rack mount is a great way to complete a professional 19″ rack installation of the TimeMachines GPS network time servers and the rack mountable NTP clock displays. A double rack mount is beneficial when two units are necessary to provide network time redundancy or display features for your installation.
In stock (can be backordered)
Quick View
Reviews
There are no reviews yet.