5V AC International Power Supply
$9.99
This 5V, 1A power supply is used to power our TM1000A GPS network time server. It includes international adapter plugs for USA, Europe, UK, and Australia.
Description
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 3 × 2 in |
| HS Code | 8504.40.9510 |
| Country of Origin | CN |
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
GPS NTP Network Time Server (TM1000A)
$349.99Add to cart
GPS NTP Network Time Server (TM1000A)
$349.99The TM1000A is a simple NTP GPS network time server. It is a cost-effective solution that makes Stratum 1 time synchronization possible across your network.
Included with EACH TM1000A purchase:
5V Power Supply, GPS Patch Antenna, Quick Set-up Guide
In stock
Quick View
Related products
-
SMB Female To BNC Male, RG-174, 12inch
$29.99Add to cart
SMB Female To BNC Male, RG-174, 12inch
$29.99SMB Female to BNC Male, 12 inch, RG-174 cable. Recommended for TM2500C 1PPS and 10MHz output connections. The TM2500C includes two of these cables to allow both 1PPS and 10MHz outputs to be used simultaneously.
In stock
Quick View -
Outdoor Timing Antenna
$139.99Add to cart
Outdoor Timing Antenna
$139.99The TW3142 is a high-gain GPS antenna specifically designed for applications in environments where high levels of nearout-of-band interfering signals can be expected. This antenna features a 40dB LNA gain to handle long cable runs.
The TW3142 covers the GPS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band and employs Tallysman’s unique Accutenna™ technology to provide excellent cross polarization rejection and greatly enhanced multipath rejection. The TW3142 features a three (3) stage dual filtered LNA plus an additional SAW pre-filter to provide exceptional rejection of close out-of-band signals and additional protection against saturation by high level sub-harmonic and L-Band signals.
The TW3142 housing has a permanent mount, IP67 compliant metal base, and an extended temperature range plastic radome, and is specifically designed to withstand the most challenging environmental conditions. Two options for pole mounting are available an L-bracket (SKU#760-907-000) or a pipe mount (SKU#760-908-000). Mount is not included with the antenna.
– Dimensions: 2.6″ Base Diameter x 2.0″ Base to Top x 1.2″ Connector Extension
– Connector: N, female (one – bottom fed).
– Works with TimeMachines TM1000A, TM2000B, and the TM2500C
– Outdoor UseIn stock
Quick View -
Rack Mountable 0.5 inch POE NTP Clock
$189.99Add to cart
Rack Mountable 0.5 inch POE NTP Clock
$189.99The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as any of our time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000, the TM2000, or the TM2500 use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The rack mount plate and relay connector is sold separately.
In stock
Quick View -
COAX-SEAL #104
$8.99Add to cart
COAX-SEAL #104
$8.99– Seals Coax fittings from moisture and corrosion.
– Stays flexible at any temperature.
– Fast and easy seal for all antenna connections.
– Forms and seals over odd shapesIn stock
Quick View
Reviews
There are no reviews yet.