TimeMachines staff will be in training April 23rd-25th. Shipping and phone access may be limited. We will fulfil orders received in the order they were placed. We apologize for any inconvenience.
TimeMachines will be closed Friday April 26th for the holiday. We will reopen on Monday April 29th. Orders received while we are closed will be fulfilled on a first in first out basis when we reopen. We apologize for any inconvenience this may cause.
View cart “Clock Relay Connector” has been added to your cart.
12V AC International Power Supply
$9.99
This 12V, 1A power supply is used to power our WiFi clock displays and our TM2000A, TM2000B, and TM2500B GPS network time servers. It includes international adapter plugs for USA, Europe, UK, and Australia.
These black mounting brackets will allow you to install the 2.5″ single-sided POE or Wifi clocks into a standard 19″ equipment rack. These mounts are not designed for, nor intended to be used with the 2″ double-sided clocks, any 4″ clock displays, or the dot matrix displays. These mounting brackets are made of powder-coated steel, and are designed and manufactured in the USA.
The TimeMachines GPS 4 Way Splitter allows using one antenna with four GPS Time Servers such as the TM1000/2000/2500. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The other three ports are DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.
The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as any of our time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000, the TM2000, or the TM2500 use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The rack mount plate and relay connector is sold separately.
Reviews
There are no reviews yet.