SHOP
Showing 17–32 of 48 results
-
TP-LINK TL-POE150S Injector
$29.99Add to Cart
TP-LINK TL-POE150S Injector
$29.99Use this PoE injector when you need to add power to the Ethernet connection for our clocks or other devices. The injector simply provides power through the Ethernet cable which means you do not need to add an outlet or another cable. This product can be used with any 802.3.af device. One port only.
In stock
Quick View -
2.5″ PoE Clock Rack Ear Set
$19.99Add to Cart
2.5″ PoE Clock Rack Ear Set
$19.99These black mounting brackets will allow you to install the 2.5″ single-sided POE or Wifi clocks into a standard 19″ equipment rack. These mounts are not designed for, nor intended to be used with the 2″ double-sided clocks, any 4″ clock displays, or the dot matrix displays. These mounting brackets are made of powder-coated steel, and are designed and manufactured in the USA.
In stock
Quick View -
Single Rack Mount for Time Servers
$59.99Add to Cart
Single Rack Mount for Time Servers
$59.99The TimeMachines single rack mount is a great way to complete a professional 19″ rack installation of the TimeMachines GPS network time servers and the rack mountable NTP clock displays.
In stock
Quick View -
Double Rack Mount for Time Servers
$69.99Add to Cart
Double Rack Mount for Time Servers
$69.99The TimeMachines double rack mount is a great way to complete a professional 19″ rack installation of the TimeMachines GPS network time servers and the rack mountable NTP clock displays. A double rack mount is beneficial when two units are necessary to provide network time redundancy or display features for your installation.
In stock
Quick View -
Outdoor Timing Antenna
$139.99Add to Cart
Outdoor Timing Antenna
$139.99The TW3142 is a high-gain GPS antenna specifically designed for applications in environments where high levels of nearout-of-band interfering signals can be expected. This antenna features a 40dB LNA gain to handle long cable runs.
The TW3142 covers the GPS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band and employs Tallysman’s unique Accutenna™ technology to provide excellent cross polarization rejection and greatly enhanced multipath rejection. The TW3142 features a three (3) stage dual filtered LNA plus an additional SAW pre-filter to provide exceptional rejection of close out-of-band signals and additional protection against saturation by high level sub-harmonic and L-Band signals.
The TW3142 housing has a permanent mount, IP67 compliant metal base, and an extended temperature range plastic radome, and is specifically designed to withstand the most challenging environmental conditions. Two options for pole mounting are available an L-bracket (SKU#760-907-000) or a pipe mount (SKU#760-908-000). Mount is not included with the antenna.
– Dimensions: 2.6″ Base Diameter x 2.0″ Base to Top x 1.2″ Connector Extension
– Connector: N, female (one – bottom fed).
– Works with TimeMachines TM1000A, TM2000B, and the TM2500C
– Outdoor UseIn stock
Quick View -
“L” Economy Mast Mount
$19.99Add to Cart
“L” Economy Mast Mount
$19.99“L” Economy stainless steel mast mount for 760-906-000 GPS timing antennas.
Clamps in picture are NOT included, but can be purchased at your local hardware store.In stock
Quick View -
Collar Mount for GPS Outdoor Timing Antenna
$24.99Add to Cart
Collar Mount for GPS Outdoor Timing Antenna
$24.99This mount is used in conjunction with the 760-906-000 timing reference antenna for mounting on top of a pole up to 1.67″ in diameter. Made of aluminum and includes two set screws to secure the mount to the pole.
In stock
Quick View -
Lightning Arrestor 0-6 GHz
$49.99Add to Cart
Lightning Arrestor 0-6 GHz
$49.990-6 GHz Lightning Protector with N Jack to N Bulkhead Jack Connectors. Includes L Shaped Mounting Bracket.
In stock
Quick View -
COAX-SEAL #104
$8.99Add to Cart
COAX-SEAL #104
$8.99– Seals Coax fittings from moisture and corrosion.
– Stays flexible at any temperature.
– Fast and easy seal for all antenna connections.
– Forms and seals over odd shapesIn stock
Quick View -
2 Way GPS Splitter
$69.99Add to Cart
2 Way GPS Splitter
$69.99The TimeMachines GPS 2 Way Splitter allows using one antenna with two GPS Time Servers such as the TM1000/2000/2500. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The second port is DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.
In stock
Quick View -
2 Way GPS Splitter with Power Injector
$89.99Add to Cart
2 Way GPS Splitter with Power Injector
$89.99The TimeMachines GPS 2 Way Powered Splitter allows using one antenna with two GPS Time Servers such as the TM1000/2000/2500. The splitter function is passive with both ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.
Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.
In stock
Quick View -
4 Way GPS Splitter
$79.99Add to Cart
4 Way GPS Splitter
$79.99The TimeMachines GPS 4 Way Splitter allows using one antenna with four GPS Time Servers such as the TM1000/2000/2500. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The other three ports are DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.
In stock
Quick View -
4 Way GPS Splitter with Power Injector
$99.99Add to Cart
4 Way GPS Splitter with Power Injector
$99.99The TimeMachines GPS 4 Way Powered Splitter allows using one antenna with four GPS Time Servers such as the TM1000/2000/2500. The splitter function is passive with all ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.
Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.
In stock
Quick View -
RG-58 Cable, Type N (male) / Type N (male)
$38.99 – $198.99Select options
RG-58 Cable, Type N (male) / Type N (male)
$38.99 – $198.99
Use this cable to connect the GPS timing antenna/amplifier to the lightning arrestor in a complete outdoor antenna installation for any of our GPS network time servers.
– Gold-plated SMA connectors.
– Shielded RG-58 cable.
– Connects lightning arrestor to the GPS antenna/amplifier.
– Indoor & outdoor use.
– Approximate loss of 13 dB per 100 ft.Quick View -
SMA Male to SMA Male Extension Cable, RG316, 3-ft
$14.99Add to Cart
SMA Male to SMA Male Extension Cable, RG316, 3-ft
$14.99SMA Male to SMA Male 3-foot extension cable. Recommended for connecting a TimeMachines GPS splitter to time servers.
In stock
Quick View -
SMB Female To BNC Male, RG-174, 12inch
$29.99Add to Cart
SMB Female To BNC Male, RG-174, 12inch
$29.99SMB Female to BNC Male, 12 inch, RG-174 cable. Recommended for TM2500C 1PPS and 10MHz output connections. The TM2500C includes two of these cables to allow both 1PPS and 10MHz outputs to be used simultaneously.
In stock
Quick View
