SHOP
Showing 17–32 of 39 results
-
DotMatrtix Relay Connector
$4.99Add to cart
DotMatrtix Relay Connector
$4.99In stock (can be backordered)
Quick View -
Double Rack Mount for Time Servers
$69.99Add to cart
Double Rack Mount for Time Servers
$69.99The TimeMachines Double Rack Mount is a great way to complete a professional 19″ rack installation of the time servers. The mounts are sized to fit both the TM1000A and the TM2000A servers that we offer, and can be used to provide network time redundancy for your installation. The metal blank is 1U tall (1.75 inches) and machined so that the existing faceplate of the time server sits flush with the front of the blank. Basic assembly requires 4 screws to attach the mount to your equipment rack, and 8 screws (four for each time server) to attach the servers to the rack mount. The mounts, made of powder-coated steel, are designed and manufactured in the USA.
In stock (can be backordered)
Quick View -
GPS NTP Network Time Server (TM1000A)
$299.99Add to cart
GPS NTP Network Time Server (TM1000A)
$299.99The TimeMachines GPS NTP Network Time Server is a simple to use GPS based time server that supplies accurate time for all computers and time keeping devices on the network. By placing a time server on the local network, (S)NTP time packets are provided without requiring systems to go to the Internet to get a Stratum 1 time synchronization. The TM1000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites. With this device installed on your local network, there is no longer the worry that if the Internet connection goes down, time synchronization is lost across the network. The unit is compact and can be placed anywhere within the network layout, even using our new time server rack mounts. The built in high sensitivity GPS receiver is able to lock multiple satellites from within multiple buildings or from a window location, eliminating the requirement that an outdoor antenna be installed. Setup and use of this time server is straightforward. Simply connect both the included power supply and the GPS antenna to the base unit and then connect the base unit to the local network. Go to a computer on the network and browse to the device at its default web address to enter the software setup within the control box. Set parameters to match your network and the system will start to send out time packets to any device on the system that asks for an update from it. When paired with our digital Power Over Ethernet (PoE) clocks, synchronized time is assured no matter the state of your network, or the state of the internet time server the clocks are pointed to. Accuracy is improved because the network delay of the internet is highly variable, while the local LAN connection is likely a sub-millisecond delay. TimeMachine GPS NTP time servers are suited to any application where coordination of events at multiple locations is required. Used by education, industrial facilities, military installations, public safety command rooms, government, broadcasting, and hospitals. Supports IPv4 and IPv6.
Included with EACH TM1000A purchase:
1 Power Supply, 1 Antenna, 1 Quick Set-up Guide
Extended Warranty Pricing/Details
* Extended warranty is NOT available for International Orders *Only 3 left in stock (can be backordered)
Quick View -
GPS NTP+PTP Network Time Server (TM2000A)
$499.99Add to cart
GPS NTP+PTP Network Time Server (TM2000A)
$499.99* This version is NOT compatible with the Verizon eFemto products. See www.css-design.com for more information.
The TimeMachines GPS NTP+PTP Network Time Server represents a major step forward in capabilities at a breakthrough price point. It will supply accurate time for all computers and time keeping devices on the network. Supporting both Precision Time Protocol (PTP) and Network Time Protocol (NTP), a Stratum 1 time source can now be available on the local network with no need for an internet connection. SNMP V2/V3 is supported on the device, authenticated NTP, Peer NTP lookup, and Manual time setting modes. The TM2000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites planet wide. In addition, a high stability OCXO reference clock is included that allows the unit to serve time if GPS lock is lost for periods of time. The unit is small and can be placed anywhere within the network layout. The built in high sensitivity GPS receiver is able to lock multiple satellites from within many buildings or from a window location, removing the requirement that outdoor antennas be installed in some applications. Outdoor antennas are available from TimeMachines including custom length cables and accessories.
To learn more about our GPS NTP and PTP time servers, give us a call today.
Included with EACH TM2000A purchase:
1 Power Supply, 1 Antenna, 1 Quick Set-up Guide
Extended Warranty Pricing/Details
* Extended warranty is NOT available for International Orders *In stock (can be backordered)
Quick View -
GPS Patch Antenna
$24.95Add to cart
GPS Patch Antenna
$24.95A GPS Patch Antenna enabling the highest quality signal for your time server.
In stock (can be backordered)
Quick View -
Lightning Arrestor 0-6 GHz
$29.99Add to cart
Lightning Arrestor 0-6 GHz
$29.990-6 GHz Lightning Protector with N Jack to N Bulkhead Jack Connectors. Includes L Shaped Mounting Bracket.
In stock (can be backordered)
Quick View -
NTP PoE and WiFi Displays
$189.99 – $459.99Select options
NTP PoE and WiFi Displays
$189.99 – $459.99Quick View -
Piezo Buzzer for DotMatrix Displays
$24.99Add to cart
Piezo Buzzer for DotMatrix Displays
$24.99In stock (can be backordered)
Quick View -
Piezo Buzzer for POE and WiFi Clocks
$24.99Add to cartPiezo Buzzer for POE and WiFi Clocks
$24.99In stock (can be backordered)
Quick View -
Rack Mountable 0.5 inch POE NTP Clock
$169.99Add to cart
Rack Mountable 0.5 inch POE NTP Clock
$169.99The TM160 WiFi clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The rack mount plate and relay connector is sold separately.
In stock (can be backordered)
Quick View -
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99Add to cart
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply.
The rack mount plate and relay connector is sold separately.In stock (can be backordered)
Quick View -
Single Rack Mount for Time Servers
$59.99Add to cart
Single Rack Mount for Time Servers
$59.99The TimeMachines Single Rack Mount is a great way to complete a professional 19″ rack installation of the time servers. The mount is sized to fit either the TM1000A or the TM2000A servers that we offer. The metal blank is 1U tall (1.75 inches) and machined so that the existing faceplate of the time server sits flush with the front of the blank. Basic assembly requires 4 screws to attach the mount to your equipment rack, and 4 screws to attach the server to the rack mount. The mount, made of powder-coated steel, is designed and manufactured in the USA.
In stock (can be backordered)
Quick View -
SMA Male Plug to Type N Male Plug Extension Cable with RG-58
$29.95 – $106.95Select options
SMA Male Plug to Type N Male Plug Extension Cable with RG-58
$29.95 – $106.95Use this cable to extend your GPS timing antenna further from the TM1000A NTP time server.
– Gold Plated SMA Connectors.
– Shielded RG-58 Cable.
– Works with TM1000A GPS NTP Server & TM2000A PTP Network Time Server.
– Indoor & Outdoor use.
– Approximate loss of 13 dB per 100 ft.Quick View -
SMA Male to SMA Male Extension Cable, RG316
$14.95Add to cart
SMA Male to SMA Male Extension Cable, RG316
$14.95SMA Male to SMA Male 3ft extension cable. Recommended for connecting a TimeMachines GPS splitter to time servers.
In stock
Quick View -
SMA RG-58 Extension Cable Male SMA to Female SMA
$32.95 – $52.95Select options
SMA RG-58 Extension Cable Male SMA to Female SMA
$32.95 – $52.95Use this cable to extend your GPS timing antenna further from the TM1000A NTP time server.
– Gold Plated SMA Connectors.
– Shielded RG-58 Cable.
– Works with TM1000A GPS NTP Server & TM2000A PTP Network Time Server.
– Indoor & Outdoor use.
– Approximate loss of 13 dB per 100 ft.Quick View -
StrikeFirst | AC Power Adapter
$19.99Add to cartStrikeFirst | AC Power Adapter
$19.99In stock (can be backordered)
Quick View
