Dual Clock Mount Bracket – 2.5″ x 4 or 6 Digit Clocks
$39.95
Use this bracket when you want to mount 2 clocks back to back. The bracket has a 3/4″ NPT threaded fitting that accepts pipe found at local hardware stores. Buy the bracket and then buy pipe locally to make your own custom installation. This product can be used for either a 4 digit clock or the 6 digit clock.
Out of stock
Additional information
| Weight | 4 lbs |
|---|---|
| Dimensions | 20 × 8 × 8 in |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Rack Mountable 0.5 inch POE NTP Clock
$169.99Add to cart
Rack Mountable 0.5 inch POE NTP Clock
$169.99The TM160 WiFi clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The rack mount plate and relay connector is sold separately.
In stock (can be backordered)
Quick View -
2.5″ PoE Clock Rack Ear Set
$19.95Add to cart
2.5″ PoE Clock Rack Ear Set
$19.95These black mounting brackets will allow you to install the 2.5″ single-sided POE or Wifi clocks into a standard 19″ equipment rack. These mounts are not designed for, nor intended to be used with, the 4″ clocks or the dot matrix displays. These mounting brackets are made of powder-coated steel, and are designed and manufactured in the USA.
In stock (can be backordered)
Quick View -
WiFi Antenna
$9.95Add to cart
WiFi Antenna
$9.95In stock
Quick View -
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99Add to cart
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply.
The rack mount plate and relay connector is sold separately.Available on backorder
Quick View
Reviews
There are no reviews yet.