SMA Male to SMA Male Extension Cable, RG316, 3-ft
$14.99
SMA Male to SMA Male 3-foot extension cable. Recommended for connecting a TimeMachines GPS splitter to time servers.
In stock
Additional information
Weight | 1 lbs |
---|---|
Dimensions | 5 × 4 × 3 in |
HS Code | 8536.69.4010 |
Country of Origin | CN |
Only logged in customers who have purchased this product may leave a review.
Related products
-
2 Way GPS Splitter with Power Injector
$89.992 Way GPS Splitter with Power Injector
$89.99The TimeMachines GPS 2 Way Powered Splitter allows using one antenna with two GPS Time Servers such as the TM1000/2000/2500. The splitter function is passive with both ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.
Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.
In stock
Quick View -
12V AC International Power Supply
$9.9912V AC International Power Supply
$9.99This 12V, 1A power supply is used to power our WiFi clock displays and our TM2000A, TM2000B, and TM2500B GPS network time servers. It includes international adapter plugs for USA, Europe, UK, and Australia.
Quick View -
Outdoor Timing Antenna
$124.99Outdoor Timing Antenna
$124.99Link to: Outdoor Antenna Products Overview for GPS NTP Time Server
The TW3142 is a high-gain GPS antenna specifically designed for applications in environments where high levels of nearout-of-band interfering signals can be expected. This antenna features a 40dB LNA gain to handle long cable runs.
The TW3142 covers the GPS L1 and SBAS (WAAS, EGNOS & MSAS) frequency band and employs Tallysman’s unique Accutenna™ technology to provide excellent cross polarization rejection and greatly enhanced multipath rejection. The TW3142 features a three (3) stage dual filtered LNA plus an additional SAW pre-filter to provide exceptional rejection of close out-of-band signals and additional protection against saturation by high level sub-harmonic and L-Band signals.
The TW3142 housing has a permanent mount, IP67 compliant metal base, and an extended temperature range plastic radome, and is specifically designed to withstand the most challenging environmental conditions. Two options for pole mounting are available an L-bracket (SKU#760-907-000) or a pipe mount (SKU#760-908-000). Mount is not included with the antenna.
– Dimensions: 2.6″ Base Diameter x 2.0″ Base to Top x 1.2″ Connector Extension
– Connector: N, female (one – bottom fed).
– Works with TimeMachines TM1000A, TM2000B, and the TM2500C
– Outdoor UseIn stock
Quick View -
Rack Mountable 0.5 inch POE NTP Clock
$189.99Rack Mountable 0.5 inch POE NTP Clock
$189.99The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as any of our time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000, the TM2000, or the TM2500 use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The rack mount plate and relay connector is sold separately.
In stock
Quick View
Reviews
There are no reviews yet.