Piezo Buzzer for DotMatrix Displays
$24.99
In stock (can be backordered)
Description
This Piezo Buzzer produces a 3500Hz tone at 99dBA of sound level. It is a compact 1.5 inches square and less than half an inch high. It comes setup to be plugged directly into our DotMatrix displays and requires no additional wiring to add an audible buzzer to those displays. It has a magnetic base that sets nicely on top of the display. Use this buzzer with the device alarm setup or count-down timing functions. Configuration can be done with either the device web page, or with TM-Manager.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 4 × 2 × 2 in |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Rack Mountable 0.5 inch POE NTP Clock
$169.99Add to cart
Rack Mountable 0.5 inch POE NTP Clock
$169.99The TM160 WiFi clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The rack mount plate and relay connector is sold separately.
In stock (can be backordered)
Quick View -
2.5″ PoE Clock Rack Ear Set
$19.95Add to cart
2.5″ PoE Clock Rack Ear Set
$19.95These black mounting brackets will allow you to install the 2.5″ single-sided POE or Wifi clocks into a standard 19″ equipment rack. These mounts are not designed for, nor intended to be used with, the 4″ clocks or the dot matrix displays. These mounting brackets are made of powder-coated steel, and are designed and manufactured in the USA.
In stock (can be backordered)
Quick View -
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99Add to cart
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply. The rack mount plate and relay connector is sold separately.
In stock (can be backordered)
Quick View -
Clock Relay Connector
$4.99Add to cart
Clock Relay Connector
$4.99In stock (can be backordered)
Quick View
Reviews
There are no reviews yet.