5V AC International Power Supply
$9.99
This 5V, 1A power supply is used to power our TM1000A GPS network time server. It includes international adapter plugs for USA, Europe, UK, and Australia.
Description
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 3 × 2 in |
| HS Code | 8504.40.9510 |
| Country of Origin | CN |
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
GPS NTP Network Time Server (TM1000A)
$349.99Add to cart
GPS NTP Network Time Server (TM1000A)
$349.99The TM1000A is a simple NTP GPS network time server. It is a cost-effective solution that makes Stratum 1 time synchronization possible across your network.
Included with EACH TM1000A purchase:
5V Power Supply, GPS Patch Antenna, Quick Set-up Guide
In stock
Quick View
Related products
-
2 Way GPS Splitter
$69.99Add to cart
2 Way GPS Splitter
$69.99The TimeMachines GPS 2 Way Splitter allows using one antenna with two GPS Time Servers such as the TM1000/2000/2500. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The second port is DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.
In stock
Quick View -
RG-58 Extension Cable, SMA (male) / SMA (female)
Select options
RG-58 Extension Cable, SMA (male) / SMA (female)
Use this cable to further extend the reach of the included GPS patch antenna from the TM1000A NTP time server, the TM2000B NTP + PTP time server, or the TM2500B NTP + PTP + 10MHz time server.
– Gold-plated SMA connectors.
– Shielded RG-58 cable.
– Extension cable for GPS patch antenna included with TM1000 and TM2000 network time servers.
– Indoor & outdoor use.
– Approximate loss of 13 dB per 100 ft.Quick View -
2 Way GPS Splitter with Power Injector
$89.99Add to cart
2 Way GPS Splitter with Power Injector
$89.99The TimeMachines GPS 2 Way Powered Splitter allows using one antenna with two GPS Time Servers such as the TM1000/2000/2500. The splitter function is passive with both ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.
Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.
In stock
Quick View -
Rack Mountable 0.5 inch WiFi NTP Clock
$229.99Add to cart
Rack Mountable 0.5 inch WiFi NTP Clock
$229.99The TM160W WiFi clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as any of our time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000, the TM2000, or the TM2500 use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply. The rack mount plate and relay connector is sold separately.
In stock
Quick View
Reviews
There are no reviews yet.