3 Year Extended Warranty for TM1000A
$79.99
Full 3 year warranty for the TM1000A.
Description
3 year extended warranty. Brings the total warranty for the device to 3 years. That includes the original first year, plus 2 additional years. Must be purchased with the TM1000A.
Additional information
| Weight | 0.00001 lbs |
|---|---|
| Dimensions | 0.00001 × 0.00001 × 0.00001 in |
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
GPS NTP Network Time Server (TM1000A)
$299.99Add to cart
GPS NTP Network Time Server (TM1000A)
$299.99The TimeMachines GPS NTP Network Time Server is a simple to use GPS based time server that supplies accurate time for all computers and time keeping devices on the network. By placing a time server on the local network, (S)NTP time packets are provided without requiring systems to go to the Internet to get a Stratum 1 time synchronization. The TM1000A system uses an active GPS antenna to maintain the current time as broadcast by United States GPS satellites. With this device installed on your local network, there is no longer the worry that if the Internet connection goes down, time synchronization is lost across the network. The unit is compact and can be placed anywhere within the network layout, even using our new time server rack mounts. The built in high sensitivity GPS receiver is able to lock multiple satellites from within multiple buildings or from a window location, eliminating the requirement that an outdoor antenna be installed. Setup and use of this time server is straightforward. Simply connect both the included power supply and the GPS antenna to the base unit and then connect the base unit to the local network. Go to a computer on the network and browse to the device at its default web address to enter the software setup within the control box. Set parameters to match your network and the system will start to send out time packets to any device on the system that asks for an update from it. When paired with our digital Power Over Ethernet (PoE) clocks, synchronized time is assured no matter the state of your network, or the state of the internet time server the clocks are pointed to. Accuracy is improved because the network delay of the internet is highly variable, while the local LAN connection is likely a sub-millisecond delay. TimeMachine GPS NTP time servers are suited to any application where coordination of events at multiple locations is required. Used by education, industrial facilities, military installations, public safety command rooms, government, broadcasting, and hospitals. Supports IPv4 and IPv6.
Included with EACH TM1000A purchase:
1 Power Supply, 1 Antenna, 1 Quick Set-up Guide
Extended Warranty Pricing/Details
* Extended warranty is NOT available for International Orders *In stock (can be backordered)
Quick View
Related products
-
2 Way GPS Splitter with Power Injector
$89.95Add to cart
2 Way GPS Splitter with Power Injector
$89.95The TimeMachines GPS 2 Way Powered Splitter allows using one antenna with two GPS Time Servers such as the TM1000A or TM2000A. The splitter function is passive with both ports DC blocked. The included 9V power supply is used to power the antenna amplifier for longer than 250ft cable runs with low signal loss cable. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. If there are multiple time servers co-located, this product can save running multiple antenna cables.
Use only with the TimeMachines conical 40dB outdoor antenna or other antennas rated to handle 9V DC.
In stock (can be backordered)
Quick View -
5V AC International Power Supply
$9.95Add to cart
5V AC International Power Supply
$9.95Quick View -
12V AC International Power Supply
$9.95Add to cart
12V AC International Power Supply
$9.95Quick View -
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99Add to cart
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply.
The rack mount plate and relay connector is sold separately.In stock (can be backordered)
Quick View
Reviews
There are no reviews yet.