Timing Antenna + Amplifier
$189.99
The timing reference antennas are specifically designed for long-lasting, trouble-free deployments in congested cell-site applications as well as broadband and WiMAX networks. The proprietary quadrifiliar helix design, coupled with multi-stage filtering provides superior out-of-band rejection and lower elevation pattern performance than traditional patch antennas. Their unique radome shape sheds water and ice, while eliminating problems associated with bird perching. 1575 MHz Micropulse GPS Reference Antenna. 4.5 dBic with N Female connector. Antenna incorporates a 40 dB low noise amplifier gain. Hardware not included.
– Dimensions: 7.5″ x 4.4″ x 3.8″.
– Connector: N, female (one – bottom fed).
– Works with TimeMachines TM1000A GPS NTP Server and TM2000A GPS PTP Server.
– Outdoor Use
In stock (can be backordered)
Description
Additional information
| Weight | 0.75 lbs |
|---|---|
| Dimensions | 8 × 6 × 4 in |
Only logged in customers who have purchased this product may leave a review.
You may also like…
-
2 Way GPS Splitter
$69.95Add to cart
2 Way GPS Splitter
$69.95The TimeMachines GPS 2 Way Splitter allows using one antenna with two GPS Time Servers such as the TM1000A or TM2000A. This passive device connects antenna amplifier power through one of the output ports to the antenna using the power provided by the time server. The second port is DC blocked. No changes in setup of the TimeMachines Time Servers are required to use this device. Compatible with other vendors GPS based time server products, see documentation for more information. Works great with the puck antennas provided with our time servers as well as our conical 40dB outdoor antenna. If there are multiple time servers co-located, this product can save running multiple antenna cables.
In stock (can be backordered)
Quick View
Related products
-
Collar Mount for GPS Timing Antennas
$29.99Add to cart
Collar Mount for GPS Timing Antennas
$29.99This mount is used in conjunction with the timing reference antennas depending on were you are mounting the actual antenna.
In stock (can be backordered)
Quick View -
Type N Male Plug to Type N Male Plug Extension Cable with RG-58
$30.95 – $107.95Select options
Type N Male Plug to Type N Male Plug Extension Cable with RG-58
$30.95 – $107.95Use this cable to extend your GPS timing antenna further from the TM1000A NTP time server.
– Gold Plated SMA Connectors.
– Shielded RG-58 Cable.
– Works with TM1000A GPS NTP Server & TM2000A PTP Network Time Server.
– Indoor & Outdoor use.
– Approximate loss of 13 dB per 100 ft.Quick View -
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99Add to cart
Rack Mountable 0.5 inch WiFi NTP Clock
$209.99The TM160 POE clock is a low profile clock based on the same hardware and software as our other NTP digital clock displays. The bright red digits are 0.5 inches tall. It is installed in the same case as our TM1000A and TM2000A time servers, making it an ideal solution for a rack mount companion to those products. It can be mounted using the same 1U rack mount face plates that the TM1000A/2000A use. Mount a single clock using the 760-022-000 plate, or mount a time server and a clock in a 1U space using the 760-023-000 dual rack mount plate. Its small size also makes it ideal as an interface to a campus wide bell system. It has the same relay output that our other displays have and all of the same versatility for alarm event setting through its web interface or using TM-Manager. The WiFi clock supports both wired Ethernet and WiFi modes with an external 12V power supply.
The rack mount plate and relay connector is sold separately.In stock (can be backordered)
Quick View -
Double Rack Mount for Time Servers
$69.99Add to cart
Double Rack Mount for Time Servers
$69.99The TimeMachines Double Rack Mount is a great way to complete a professional 19″ rack installation of the time servers. The mounts are sized to fit both the TM1000A and the TM2000A servers that we offer, and can be used to provide network time redundancy for your installation. The metal blank is 1U tall (1.75 inches) and machined so that the existing faceplate of the time server sits flush with the front of the blank. Basic assembly requires 4 screws to attach the mount to your equipment rack, and 8 screws (four for each time server) to attach the servers to the rack mount. The mounts, made of powder-coated steel, are designed and manufactured in the USA.
In stock (can be backordered)
Quick View
Reviews
There are no reviews yet.